3D Video Wizard 2D-to-3D Converter with 3D Glasses

3D Video Wizard 2D-to-3D Converter with 3D Glasses

3D Video Wizard 2D-to-3D Converter with 3D Glasses Family Pack and Remote ControlAdd another layer of enjoyment to your living room entertainment. The 3D Video Wizard transforms your regular 2D... Prices shown on the previously recorded video may not represent the current price. View hsn.com to view the current selling price. HSN Item #164411

3D Video Wizard Guide

3D Video Wizard Guide

3D Video Wizard (2D to 3D Converter Box) First Look:

3D Video Wizard (2D to 3D Converter Box) First Look:

The 3D Video Wizard promises to transform 2D displays into 3D (so you can playback 3D content, or even display 2D content in 3D). However, with such a low-price point, we can't help but feel slightly dubious. We take a look at what's in the box in this video first look. Find it on Amazon: https://goo.gl/xksc4i Extra 3D Glasses: http://amzn.to/2aHD0iT

3D Wizard review- 3D on 2D television- 1/2

3D Wizard review- 3D on 2D television- 1/2

I got this thing in case my sony 3D display conks out on me and i wish i knew about it before i bought the 3D display because honestly it's good enough for me and lighter on my wallet. The second part http://www.youtube.com/watch?v=QSzB1L4VPSg Killzone 3 3D gameplay with this converter http://www.youtube.com/watch?v=ItKZZuEKRak

How to Setup the MonoPrice 2D to 3D Converter for 3D Gaming, TV, and Movies

How to Setup the MonoPrice 2D to 3D Converter for 3D Gaming, TV, and Movies

http://monoprice.com Subscribe to our channel: http://goo.gl/lWiFis 1) 2D to 3D HDTV/DLP Converter (http://bit.ly/qO17PN) Key Features: 2D to 3D conversion, three 3D depth settings and is compatible with 2DTV, 3DTV and 3D DLP projectors. 2) 3D IR Active Shutter Glasses for Samsung 3D Displays (http://bit.ly/oPjVvr) Key Features: Samsung 3DTVs compatible, sleek design, and 50 hours of use per charge. 3) 3D IR Active Shutter Glasses for LG 3D Displays (http://bit.ly/q9pBG5) Key Features: LG 3DTVs compatible, sleek design, and 50 hours of use per charge. Visit our channel for more helpful how-to videos and great new product highlights from Monoprice - http://www.youtube.com/monopricecom

[Hindi] 3D Technology Explained in Detail: Everything you need to know about 3D

[Hindi] 3D Technology Explained in Detail: Everything you need to know about 3D

Namaskaar Dosto, ic video mein maine aapko 3D Technology ke baare mein bataya hai, 3D hota kya hai, 3D ko record kaise karte hai, aur 3D ko playback kaise karte hai. Share, Support, Subscribe!!! Subscribe: http://bit.ly/1Wfsvt4 Youtube: http://www.youtube.com/c/TechnicalGuruji Twitter: http://www.twitter.com/technicalguruji Facebook: http://www.facebook.com/technicalguruji Instagram: http://instagram.com/technicalguruji Google Plus: https://plus.google.com/+TechnicalGuruji

The wizard 101 original 3D video

The wizard 101 original 3D video

I created this video with the YouTube Video Editor (https://www.youtube.com/editor)

Wizard X220 - How to setup Dshot and 3D (without losing a finger)+ AKK CA20 cam colour gain

Wizard X220 - How to setup Dshot and 3D (without losing a finger)+ AKK CA20 cam colour gain

You asked for it, you got it. Dshot and 3D setup for your Wizard. I've been flying the stock Wizard in 3D mode since it's original firmware and one shot setup but for some off reason it took some trial and error and guesswork to manually calibrate 3D mode to avoid twitching motors. I've had this before on a few one shot quads like the P200 but they have always been a single motor and just a hair off, not all 4 motors and several clicks plus uneven. Even with these values I found normal mode curves were affected so it was time for enabling DSHOT and getting some clean values from ESC to FC. It also has the massive advantage of zero calibration so 3D setup is an absolute breeze besides the BLHELI bug covered in the setup part. I was not definite what speed DSHOT could safely be used on the stock ESC so 150 was just to test it out. I think the colour on the AKK camera was much better than last video but I also think the colour gain needs lowering and the red/blue balance putting a touch more blue. The light handling for such an affordable camera is brilliant though and I couldn't resist grabbing another for my next FPV build. I'd still love a premium runcam but when I can get something very good for half that i'm just not quite ready to spend my RC budget on that quite yet. The Wizard X220 https://www.banggood.com/search/wizard-x220.html?p=UI14032168777201508N Wizard X220 playlist https://www.youtube.com/playlist?list=PL8zs5ZGIg_iwHKYg9tNovUZUSIZNycsgR DAL 5" 3D props - still can't break one - not efficient but balanced well and have good punch. I wish all props were this cheap and durable http://www.surveilzone.com/dalprop-5%E2%80%B3-3d-props-for-fpv-racing-g-1545 Awesome lipos to feed the Wizard cos 3D be hungry time for lipos http://www.banggood.com/Gaoneng-GNB-1300mAh-4S-15_2V-19_76Wh-100C200C-HV-4_35V-Lipo-Battery-for-FPV-Racing-p-1140892.html?p=UI14032168777201508N http://www.banggood.com/Gaoneng-GNB-14_8V-1300mAh-4S-120C240C-Lipo-Battery-for-FPV-Racing-p-1103269.html?p=UI14032168777201508N http://www.banggood.com/GAONENG-GNB-14_8v-1300mAh-4S-80C160C-Lipo-Battery-for-FPV-Racing-p-1099355.html?p=UI14032168777201508N AKK CA20 camera http://www.akktek.com/akk-ca20-600tvl-2-8mm-120-degree-high-picture-quality-sony-ccd-camera-with-osd-for-fpv-multicopter.html VTX http://www.akktek.com/products/transmitters-receivers/akk-k31-fpv-40ch-600mw-5v-out-for-cam-mini-av-transmitter-with-race-band.html http://www.akktek.com

Dense Support Structures | Simplify3D

Dense Support Structures | Simplify3D

Save time and filament while getting great support using dense support structures in Simplify3D. As we've explained in a previous video, some models need to be printed using support material, which prevents overhangs from being printed over thin air. Our example model is this famous Paris monument, the Arc de Triomphe. And today we're printing with two different materials. We're printing the arch itself in PLA and printing the support structures in PVA, a water-soluble filament. Dissolvable filament is great to use for supports when you need a clean surface finish on the underside of a part where they are in contact with support structures, or if you will have support structures that are difficult to remove otherwise. And for those of you that have ever purchased PVA, you know that it can be quite expensive. We're using also going to be using a unique feature in Simplify3D called dense supports which will save us time and plastic. Let's preview how this model will be printed if we don't use support structures. There are portions of this arch that will need support material. Otherwise our extruder will be trying to add a new layer of plastic here with nothing underneath it. So let's open Process Settings, click Show Advanced, and go to the Supports tab. You may notice some settings look familiar; those for automatic placement which you can also access from the Customize Supports window. I've printed this model before, so I've already set the pillar resolution to 2mm to capture some of its smaller details and changed the support type to From Build Platform Only so we'll only be dealing with the supports on the underside of the arch. Let's go back into the preview. When the printer builds the arch, it will be now supported from below. Before we get into dense support structures, let's review some terminology. Most of you are probably familiar with infill percentage, which determines how much plastic is printed on the interior of the part. An infill percentage of 100% would be completely solid. In this case, our infill is set at 20%, so this part is only 20% solid on the inside. The same concept of fill percentage also exists for support structures. These support structures are currently set to have an infill of 30%, so you can see that these support walls are closer together, making it more solid than the infill on the interior of the part. But this 30% infill is used for the entire height of the support structures, which is going to use more of my expensive PVA filament than I would like. There's a feature in the software called dense support structures which allows you to vary the density of your support material. It will allow us to use a lower infill percentage for the majority of the support, and only transition to a higher infill percentage where the structures are contacting the surface of the part. To enable this feature, we change the number of dense support layers, or how many layers of this higher-infill support will be printed. Let's change it to 5. The only other setting we have to think about here is the support infill. We have the infill percentage for the normal supports, and the infill percentage for the dense supports. Let's leave the dense support infill at 70%, but decrease the normal support infill to 15%. This will save us a lot of filament. So if we slice, now you can see that we still have our regular supports, shown in light gray, but for the last 5 layers before the supports make contact with the part, we have these denser supports, shown in dark gray. Now, if you happen to be using a single extruder printer, that means you'll be printing both the part and the support structures in the same material. For that reason, the software is usually set up to have a small amount of separation in between the part and the supports to prevent them from bonding together, which allows you to remove the supports easily. But I mentioned in the beginning, I'm using a water-soluble filament for my support structures, so I'll want to set things up a little differently. For water-soluble filaments, we don't need to snap the supports off the part when it's done printing. We're going to let warm water remove the supports! In this case, we actually do want the PVA support structures to bond to our PLA part, so we're going to remove some of that separation. This is part of the reason why printing with water-soluble supports can improve the surface finish on the underside of your parts. So let's go back, open the support tab, and look at the Separation from Part section. I'm going to decrease the horizontal offset to .1, and change the upper and lower separation layers to 0. These settings will work well for dissolvable filament. So now that you know how to use dense supports, you can save time and filament while also getting great 3D prints! STL Model Source: http://www.thingiverse.com/thing:543860

3D Printing Disney Haunted Mansion Plaque with Simplify3D Variable Settings Wizard on Formbot TREX2+

3D Printing Disney Haunted Mansion Plaque with Simplify3D Variable Settings Wizard on Formbot TREX2+

I love Disneyland, and in this video I am 3d printing the Haunted Mansion plaque. The plaque was modeled thanks to reference photos and photogrammetry! WATCH OUT FOR THE HAT BOX GHOST! EDIT: Model IS on MyMiniFactory: https://www.myminifactory.com/object/disney-world-magic-kingdom-the-haunted-mansion-39443 == Support the Channel via Patreon! = http://3d.pn/patreon == Cool New T-Shirts! = http://the3dprintingnerd.com/shop == Find Me Socially = Twitch: http://twitch.tv/joeltelling = Twitter: http://twitter.com/joeltelling = Facebook: http://facebook.com/3dprintingnerd = Instagram: http://instagram.com/joeltelling == Shop at the Affiliate Links Below to Help the Channel! = Printed Solid: http://3d.pn/printedsolid = Matterhackers: http://3d.pn/matterhackers = Amazon US: http://amazon.3dprintingnerd.net = Amazon Canada: http://amazonca.3dprintingnerd.net = Amazon UK: http://amazoncouk.3dprintingnerd.net == Want some 3D Printing Nerd Swag? = 3D Printing Nerd shirt! http://3d.pn/shirt = 3D Printing Nerd mug! http://3d.pn/mug Want to send me something for Fan Mail Friday? attn: 3D Printing Nerd 509 NE 165th st Shoreline, WA 98155 USA Check out Zoe Stanley Arts on deviantart.com for more amazing work like the Hatbox Ghost used at the end of the video! https://zoestanleyarts.deviantart.com/art/Hatbox-Ghost-527142405 Music provided by https://futurevega.sourceaudio.com Track: Summer ID

Top Videa -  loading... Změnit krajinu
Načíst dalších 10 videí
 
 
Sorry, You can't play this video
00:00/00:00
  •  
  •  
  •  
  •  
  •  
  •  
  •  
CLOSE
CLOSE
CLOSE